PERIODIC MAINTENANCE AND ADJUSTMENT
7-11
7
3. Place an oil pan under the final
transmission case to collect the
used oil.
4. Remove the final transmission oil
filler cap and its O-ring from the fi-
nal transmission case.
5. Remove the final transmission oil
drain bolt and its gasket to drain
the oil from the final transmission
case.
6. Install the final transmission oil
drain bolt and its new gasket, and
then tighten the bolt to the speci-
fied torque.
7. Refill with the specified amount of
the recommended final transmis-
sion oil.
WARNING! Make sure
that no foreign material enters
the final transmission case.
Make sure that no oil gets on
the tire or wheel.
[EWA11311]
8. Install the final transmission oil fill-
er cap and its new O-ring, and
then tighten the oil filler cap.
9. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
EAUU1142
Air filter and V-belt case air
filter elements
The air filter element should be re-
placed at every 16000 km (10000 mi)
and the V-belt case air filter element
should be cleaned at the intervals
specified in the periodic maintenance
and lubrication chart. Service the air fil-
ter elements more frequently if you are
riding in unusually wet or dusty areas.
Checking and replacing the air filter
element
1. Place the vehicle on the center-
stand.
2. Remove the air filter case cover by
removing the screws.
1. Final transmission oil drain bolt
1
ZAUU0625
Tightening torque:
Final transmission oil drain bolt:
22 Nm (2.2 m·kgf, 16.2 ft·lbf)
Recommended final transmission oil:
See page 9-1.
Oil quantity:
0.14 L (0.15 US qt, 0.12 Imp.qt)
1GSF8199E0.book Page 11 Thursday, March 8, 2012 9:24 AM