manualshive.com logo in svg

Yamaha TT250RX 2007, Руководство пользователя

Поделиться
Скачать
Yamaha TT250RX 2007 Скачать руководство пользователя страница 62

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-25

 

1

2

3

4

5

6

7

8

9

 

2. While applying the front brake,

push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.

CAUTION:

 

 ECA10590

 

If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or re-

 

pair it.

 

EAU23280

 

Checking the steering 

 

Worn or loose steering bearings may
cause danger. Therefore, the operation
of the steering must be checked as fol-
lows at the intervals specified in the pe-
riodic maintenance and lubrication
chart.

1. Place a stand under the engine to

raise the front wheel off the
ground.

WARNING

 

EWA10750

 

Securely support the vehicle so that

 

there is no danger of it falling over.

 

2. Hold the lower ends of the front

fork legs and try to move them for-
ward and backward. If any free
play can be felt, have a Yamaha
dealer check or repair the steering.

ProCarManuals.com

Содержание TT250RX 2007























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды