manualshive.com logo in svg

Yamaha TT250RX 2007, Руководство пользователя

Поделиться
Скачать
Yamaha TT250RX 2007 Скачать руководство пользователя страница 54

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-17

 

1

2

3

4

5

6

7

8

9

 

EAU21940

 

Spoke wheels 

 

To maximize the performance, durabil-
ity, and safe operation of your motorcy-
cle, note the following points regarding
the specified wheels.

 

●

 

The wheel rims should be checked
for cracks, bends or warpage, and
the spokes for looseness or dam-
age before each ride. If any dam-
age is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.

 

●

 

The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.

 

●

 

Ride at moderate speeds after
changing a tire since the tire sur-
face must first be “broken in” for it
to develop its optimal characteris-
tics.

 

EAU22031

 

Adjusting the clutch lever free 
play 

 

The clutch lever free play should mea-
sure 10.0–15.0 mm (0.39–0.59 in) as
shown. Periodically check the clutch le-
ver free play and, if necessary, adjust it
as follows.

1. Loosen the locknut at the clutch le-

ver.

2. To increase the clutch lever free

play, turn the adjusting bolt in di-
rection (a). To decrease the clutch

lever free play, turn the adjusting
bolt in direction (b).

3. If the specified clutch lever free

play could be obtained as de-
scribed above, tighten the locknut
and skip the rest of the procedure,
otherwise, proceed as follows.

4. Fully turn the adjusting bolt in di-

rection (a) to loosen the clutch ca-
ble.

5. Loosen the locknut further down

the clutch cable.

6. To increase the clutch lever free

play, turn the adjusting nut in direc-
tion (a). To decrease the clutch le-
ver free play, turn the adjusting nut
in direction (b).

7. Tighten both locknuts.

 

1. Locknut (clutch lever)
2. Adjusting bolt
3. Locknut (clutch cable)
4. Adjusting nut
5. Clutch lever free play

1 2

3 4

5

(a)

(b)

(b)

(a)

ProCarManuals.com

Содержание TT250RX 2007























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды