Perio
d
ic maintenance an
d
a
d
justment
7-29
7
5. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a hi
g
her ampera
g
e
ratin
g
than recommen
d
e
d
to
avoi
d
causin
g
extensive
d
am-
a
g
e to the electrical system an
d
possi
b
ly a fire.
[EWA15132]
6. Connect the battery coupler.
7. Install the battery cover by install-
ing the bolts.
8. Install the seat.
9. Turn the main switch to the on po-
sition.
10. Start the engine.
11. If the fuse immediately blows
again, check for a loose connec-
tion and repair. If none found,
have your Yamaha dealer check
the vehicle.
EAU75190
Supportin
g
the motorcycle
Since this model is not equipped with a
centerstand, use a maintenance stand
when removing the front or rear wheel,
adjusting the chain or washing the ve-
hicle, etc.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
TIP
If a suitable maintenance stand is not
available, a strong wooden box can be
used instead.
1. Battery coupler
Specifie
d
fuse:
10.0 A
1
1. Maintenance stand (for off-road motorcycle)
1
U2CJ86E0.book Page 29 Tuesday, June 26, 2018 10:28 AM