Yamaha TT-R230 Скачать руководство пользователя | Manualshive

Страница: 57 / 71

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-26

7

ways shield your eyes when
working near batteries. In case
of contact, administer the fol-
lowing FIRST AID.

• EXTERNAL: Flush with plenty

of water.

• INTERNAL: Drink large quan-

tities of water or milk and im-
mediately call a physician.

• EYES: Flush with water for 15

minutes and seek prompt
medical attention.



Batteries produce explosive hy-
drogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and pro-
vide sufficient ventilation when
charging it in an enclosed
space.



KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

NOTICE

ECA10621

Never attempt to remove the battery
cell seals, as this would permanently
damage the battery.

To charge the battery

Have a Yamaha dealer charge the bat-
tery as soon as possible if it seems to
have discharged. Keep in mind that the
battery tends to discharge more quick-
ly if the vehicle is equipped with op-
tional electrical accessories.

NOTICE

ECA16522

To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (con-
stant-voltage) battery charger is re-
quired. Using a conventional battery
charger will damage the battery.

To store the battery

1. If the vehicle will not be used for

more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.

NOTICE:

When removing the

battery, be sure the key is
turned to “OFF”, then discon-
nect the negative lead before
disconnecting the positive lead.

[ECA16303]

2. If the battery will be stored for

more than two months, check it at
least once a month and fully
charge it if necessary.

3. Fully charge the battery before in-

stallation.

NOTICE:

When install-

ing the battery, be sure the key
is turned to “OFF”, then connect
the positive lead before con-
necting the negative lead.

[ECA16841]

4. After installation, make sure that

the battery leads are properly con-
nected to the battery terminals.

NOTICE

ECA16531

Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.

UB6820E0.book Page 26 Wednesday, July 9, 2014 10:50 AM

«
...
55
56
57
58
59
...
»

Содержание TT-R230








































































Отзывы:

Нет отзывов

Похожие инструкции для TT-R230

Бренд: DMC Страницы: 2

Бренд: P.Lindberg Страницы: 26

Бренд: BMW Страницы: 176

Бренд: Honda Страницы: 3

Бренд: W&W Cycles Страницы: 5

Бренд: hepco & becker Страницы: 4

Бренд: DYNATEK Страницы: 4

Бренд: DYNATEK Страницы: 8

Бренд: Yamaha Страницы: 81

2011 Star XV250A

Бренд: Yamaha Страницы: 90

2011 V Star XVS650A

Бренд: Yamaha Страницы: 94

Бренд: Yamaha Страницы: 102

Бренд: Yamaha Страницы: 102

Бренд: Yamaha Страницы: 88

Бренд: Yamaha Страницы: 96

2010 V Star XVS650AZ

Бренд: Yamaha Страницы: 92

Бренд: Yamaha Страницы: 96

Бренд: Yamaha Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды