Yamaha TT-R230 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 71

Yamaha TT-R230 Скачать руководство пользователя страница 58

PERIODIC MAINTENANCE AND ADJUSTMENT

7-27

7

EAUW0625

Replacing the fuse

The fuse holder is located behind pan-
el. (See page 7-6.)
If the fuse is blown, replace it as fol-
lows.

1. Push the ignition switch to set it to

“OFF”.

2. Remove the blown fuse, and then

install a new fuse of the specified
amperage.

WARNING! Do not

use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.

[EWA15132]

3. Push the ignition switch to set it to

“ON”.

4. If the fuse immediately blows

again, have a Yamaha dealer
check the electrical system.

EAU24351

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other mainte-
nance requiring the motorcycle to
stand upright. Check that the motorcy-
cle is in a stable and level position be-
fore starting any maintenance. A
strong wooden box can be placed un-
der the engine for added stability.

To service the front wheel

1. Stabilize the rear of the motorcy-

cle by using a motorcycle stand
or, if an additional motorcycle
stand is not available, by placing a
jack under the frame in front of the
rear wheel.

2. Raise the front wheel off the

ground by using a motorcycle
stand.

To service the rear wheel

Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing

1. Fuse
2. Spare fuse

Specified fuse:

10.0 A

UB6820E0.book Page 27 Wednesday, July 9, 2014 10:50 AM

«
...
56
57
58
59
60
...
»

Содержание TT-R230








































































Отзывы:

Нет отзывов