Yamaha TT-R125E, Руководство пользователя

Страница: 37 / 92

INSTRUMENT AND CONTROL FUNCTIONS
4-9
4
The spring preload setting is deter-
mined by measuring distance A,
shown in the illustration. The short-
er distance A is, the higher the
spring preload; the longer distance
A is, the lower the spring preload.
3. Tighten the locknut to the specified
torque. NOTICE: Always tighten
the locknut against the adjust-
ing nut, and then tighten the
locknut to the specified torque.
[ECA11241]
Rebound damping force
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting dial in direction
(a). To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting dial in di-
rection (b).
Compression damping force
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting knob
in direction (a). To decrease the com-
1. Locknut
2. Adjusting nut
1 2
A
(a)
(b)
Spring preload:
Minimum (soft) for TT-R125E/TT-
R125LW:
Distance A = 175 mm (6.89 in)
Minimum (soft) for TT-R125LWE:
Distance A = 167.5 mm (6.59 in)
Standard for TT-R125E/TT-R125LW:
Distance A = 165 mm (6.50 in)
Standard for TT-R125LWE:
Distance A = 160.5 mm (6.32 in)
Maximum (hard) for TT-R125E/TT-
R125LW:
Distance A = 155 mm (6.10 in)
Maximum (hard) for TT-R125LWE:
Distance A = 147.5 mm (5.80 in)
Tightening torque:
Locknut:
42 Nm (4.2 m·kgf, 30 ft·lbf)
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
1 clicks in direction (a)*
Standard:
12 clicks in direction (a)*
Maximum (hard):
20 clicks in direction (a)*
* With the adjusting dial fully turned in
direction (b)
U39C81E0.book Page 9 Monday, April 26, 2010 2:43 PM