Yamaha TRACER 700 2020, Руководство пользователя

Страница: 36 / 98

Instrument an d control functions
3-21
3
EAUM4241
A d justin g the front fork
The front fork is equipped with spring
preload adjusting bolts and rebound
damping force adjusting screws.
NOTICE
ECA10102
To avoi d d ama g in g the mechanism,
d o not attempt to turn b eyon d the
maximum or minimum settin g s.
WARNING
EWA10181
Always a d just b oth fork le g s equally,
otherwise poor han d lin g an d loss of
sta b ility may result.
Sprin g preloa d
Turn the adjusting bolt in direction (a)
to increase the spring preload.
Turn the adjusting bolt in direction (b)
to decrease the spring preload.
The spring preload setting is deter-
mined by measuring distance A,
shown in the illustration. The shorter
distance A is, the higher the spring pre-
load; the longer distance A is, the lower
the spring preload.
Re b oun d d ampin g force
Turn the adjusting screw in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting screw in direction (b)
to decrease the rebound damping for-
ce.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
1. Spring preload adjusting bolt
1. Distance A
1
Sprin g preloa d settin g :
Minimum (soft):
Distance A = 20.0 mm (0.79 in)
Standard:
Distance A = 15.0 mm (0.59 in)
Maximum (hard):
Distance A = 5.0 mm (0.20 in)
UB4TE0E0.book Page 21 Monday, December 9, 2019 3:53 PM