Instrument an
d
control functions
3-8
3
Transmission
g
ear
d
isplay
The transmission gear display shows
the selected gear. The neutral position
is indicated by “–”.
Clock
The clock uses a 12-hour time system.
To set the clock
1. Set the multi-function display to
“ODO”
2. Push the “TRIP” switch until the
hour digits start flashing.
3. Push the “TRIP” switch to set the
hours.
4. Push the “INFO” switch and the
minute digits will start flashing.
5. Push the “TRIP” switch to set the
minutes.
6. Push the “INFO” switch to confirm
settings and start the clock.
TIP
When setting the hours and minutes,
push the “TRIP” switch briefly to in-
crease the increment value one by one,
or push and hold the switch to increase
the increment value continuously.
Multi-function
d
isplay
The multi-function display can show:
an odometer
two tripmeters
a fuel reserve tripmeter
an instantaneous fuel consump-
tion display
an average fuel consumption dis-
play
a coolant temperature display
an air temperature display
a brightness control mode
The odometer shows the total distance
the vehicle has traveled. The standard
tripmeters show the distance traveled
since they were last reset. The fuel re-
1. Transmission gear display
1. Clock
1
1
1. Multi-function display
1
UB4TE0E0.book Page 8 Monday, December 9, 2019 3:53 PM
