Perio
d
ic maintenance an
d
a
d
justment
8-33
8
EAU59890
Replacin
g
the license plate
li
g
ht
b
ul
b
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
out.
2. Remove the burnt-out bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars, washers and
nuts.
EAU67131
Supportin
g
the motorcycle
Since this model is not equipped with a
centerstand, use maintenance stands
when removing the front or rear wheel
or when performing other maintenance
that requires the motorcycle to stand
up right.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
1
2
2
4
3
3
1. License plate light bulb
1
1. Maintenance stand (example)
1
UB4T20E0.book Page 33 Tuesday, April 4, 2023 9:44 AM
