Yamaha T115FL-2, Руководство пользователя

Страница: 65 / 80

Perio d ic maintenance an d a d justment
7-30
7
EAUU2052
Replacin g the rear turn si g nal
li g ht b ul b
1. Remove panel B. (See page 7-7.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the burnt out bulb by
pulling it out.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
NOTICE
ECAU0091
If a tailli g ht b ul b of d ifferent watta g e
than recommen d e d is use d , it may
cause the b attery to d ischar g e or af-
fect the tailli g ht li g htin g .
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the panel.
EAU25853
Trou b leshootin g
Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting chart
represents a quick and easy procedure
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
WARNING
EWA15142
When checkin g the fuel system, d o
not smoke, an d make sure there are
no open flames or sparks in the ar-
ea, inclu
d in g pilot li g hts from water
UB6FE0E0.book Page 30 Friday, August 11, 2017 3:37 PM