Yamaha SR10RDG 2015, Руководство оператора

Страница: 19 / 54

17

NOTE: If the throttle control lever
operates properly and the engine
does not start, a malfunctioning moni-
tor switch may be the problem. Take
the snowmobile to an authorized
Yamaha Snowmobile dealer for ser-
vice. If not under warranty, this ser-
vice is at the discretion and expense
of the snowmobile owner. However, if
a dire emergency exists wherein the
engine must be started, disconnect
the throttle monitor switch located in
the right-side handlebar control.

NOTE: If disconnection of the throt-
tle monitor switch is needed to start
the engine, take the snowmobile to an
authorized Yamaha Snowmobile
dealer for service as soon as possi-
ble. If not under warranty, this service
is at the discretion and expense of the
snowmobile owner.

NOTE: The monitor switch is now
bypassed. All other ignition/electrical
features (ignition switch, emergency
stop switch, headlight, taillight, and
brakelight) will operate properly.
Varying Altitude
Operation
Operating a snowmobile at varying alti-
tudes requires changes in performance
components. These changes affect drive
train components. Have a Yamaha dealer
perform altitude-related service.

NOTE: Just as important as cali-
brating the snowmobile for higher alti-
tudes is recalibrating the snowmobile
when going to lower altitudes.

NOTE: Drive train changes can be
made by the snowmobile owner if
qualified to do so. If the owner does
not feel qualified, take the snowmo-
bile to an authorized Yamaha Snow-
mobile dealer for this service. This
service is at the discretion and
expense of the snowmobile owner
.
! WARNING
Under no circumstances should dis-
connection of the throttle control wir-
ing harness be used as a substitute
for the monitor switch during normal
operation of the snowmobile. Per-
sonal injury and damage could occur
if the throttle system malfunctions or
if the operator is unable to stop the
engine in an emergency. If the snow-
mobile must be operated with a dis-
connected throttle control wiring
harness, EXTREME CAUTION MUST
BE TAKEN. NEVER EXCEED 10 MPH
WITH THE THROTTLE CONTROL
WIRING HARNESS DISCONNECTED.