manualshive.com logo in svg

Yamaha SPX2000 Editor, Руководство пользователя

Официальный редактор Yamaha SPX2000 с Owner's Manual доступен для загрузки бесплатно на manualshive.com. Расширьте возможности вашего процессора эффектов с помощью этих инструкций. Скачайте руководство прямо сейчас, чтобы начать эксплуатацию в полную силу.

Поделиться
Скачать
background image

30   

SPX2000—Owner’s Manual

Stereo Reverb (PRESET bank)

These are stereo reverbs; they allow two-channel input.
Each aspect of the sound is controlled by the following effect parame-
ters.

Early reflections: 

INI.DLY

Reverberation: 

REV TIME, HI.RATIO, LO.RATIO, DIFF., DENSITY

Overall effect sound:

 REV TYPE, E/R BAL.

Filter/equalizer:

 HPF, LPF

Output level: 

OUT LVL, MIX BAL.

Parameter details

■

Basic parameters

■

Fine parameters

Effect list

The following tables show the default parameter values for the effects belonging to the Stereo Reverb type (PRESET bank).

■

Basic parameters

■

Fine parameters

Parameter name

Range

Explanation

REV TYPE

Hall, Room, Stage, Plate

The pattern of reverb; this determines the basic character of the effect. The characteristics of the 
reverberation will depend on the type you select here.

REV TIME

0.3—99.0 s

Reverb time. This is expressed as the time over which reverberation at 1 kHz will decay by 60 dB.

HI.RATIO

0.1—1.0

Reverb time for the high-frequency range or low-frequency range, expressed as a proportion of 
REV TIME. If this value is 0.1 the time will be 1/10th the REV TIME; if it is 1.0 the time will be the 
same as the REV TIME. You can adjust these values to simulate the absorptiveness of the walls or 
ceiling. HI.RATIO is the decay of the high-frequency range, and LO.RATIO is the decay of the low-
frequency range.

LO.RATIO

0.1—2.4

INI.DLY

0.0—100.0 ms

Delay of the early reflections relative to the original sound. This also affects the delay until the 
reverberation is heard.

DIFF.

0—10

Diffusion of the sound to left and right. Increasing this value will make the reverberation more 
spaciousness.

DENSITY

0—100%

Density of the reverberation. Increasing this value will make the reverberation smoother. You can 
create unique effects by lowering this value.

Parameter name

Range

Explanation

MIX BAL.

0—100%

Balance between the original sound and effect sound. At a setting of 0% only the original sound 
will be output; at a setting of 100% only the effect sound will be output.

OUT LVL

0—100%

Output level after the original sound and effect sound have been mixed. Decrease this value if you 
want to lower the output. At a setting of 0% there will be no output.

E/R BAL.

0—100%

Balance of the early reflections and subsequent reverberation. At a setting of 100% only the early 
reflections will be output; at a setting of 0% only the reverberation will be output.

HPF

Thru, 21.2 Hz—8.00 kHz

A filter that cuts the low-frequency portion of the effect. Frequency components lower than the 
frequency specified here will be cut. With a setting of Thru this filter will do nothing. This filter 
does not affect the original sound.

LPF

50.0 Hz—16.0 kHz, Thru

A filter that cuts the high-frequency portion of the effect. Frequency components above the fre-
quency specified here will be cut. With a setting of Thru this filter will do nothing. This filter does 
not affect the original sound.

No.

Effect name

REV TYPE

REV TIME

HI.RATIO

LO.RATIO

INI.DLY

DIFF.

DENSITY

9

STEREO HALL

Stage

2.2 s

0.3

1.1

15.5 ms

3

80%

10

VOCAL CHAMBER

Stage

1.9 s

0.3

1.1

49.8 ms

3

94%

24

THIN PLATE

Room

1.8 s

0.5

1.0

44.5 ms

3

96%

43

DRUM MACH. AMB S

Room

1.2 s

0.3

0.8

9.1 ms

1

80%

No.

Effect name

MIX BAL.

OUT LVL

E/R BAL.

HPF

LPF

9

STEREO HALL

100%

100%

45%

Thru

9.50 kHz

10

VOCAL CHAMBER

100%

85%

30%

Thru

7.50 kHz

24

THIN PLATE

100%

100%

54%

50.0 Hz

10.6 kHz

43

DRUM MACH. AMB S

100%

100%

70%

Thru

8.00 kHz

INI. DLY

REV TIME

Level

Time

Early reflections

Reverberation

Original sound

Содержание SPX2000 Editor













































































































Отзывы:

Нет отзывов

Похожие инструкции для SPX2000 Editor

LaCie 5big Network 2 Datasheet preview
5big Network 2
Бренд: LaCie Страницы: 4
LaCie d2 Network 2 Datasheet preview
d2 Network 2
Бренд: LaCie Страницы: 4
Analog Devices ADAU1961 Manual preview
ADAU1961
Бренд: Analog Devices Страницы: 76
Dahua DHI-NVR2104-P-4KS2 Quick Start Manual preview
DHI-NVR2104-P-4KS2
Бренд: Dahua Страницы: 23
IAR SYSTEMS IAR KickStart Kit TWR-K60N512-IAR Getting Started Manual preview
IAR KickStart Kit TWR-K60N512-IAR
Бренд: IAR SYSTEMS Страницы: 8
MC PCIe-DIO96H User Manual preview
PCIe-DIO96H
Бренд: MC Страницы: 21
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Бренд: National Instruments Страницы: 130
Qlogic Storage Networking (Unified Fabric Pilot) Installation Manual preview
Storage Networking (Unified Fabric Pilot)
Бренд: Qlogic Страницы: 76
EMTRUST CP75X User Manual preview
CP75X
Бренд: EMTRUST Страницы: 103
Network Critical SmartNA-X User Manual preview
SmartNA-X
Бренд: Network Critical Страницы: 200
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Бренд: Ubiquiti Страницы: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Бренд: CG Страницы: 112
IBM 7311-D11 Removal And Replacement Procedures preview
7311-D11
Бренд: IBM Страницы: 74
Renesas RL78/L1C User Manual preview
RL78/L1C
Бренд: Renesas Страницы: 4
Alcatel-Lucent 1677 Brochure preview
1677
Бренд: Alcatel-Lucent Страницы: 8
A-Trend OPTI495XLC VL-BUS 3/486 Manual preview
OPTI495XLC VL-BUS 3/486
Бренд: A-Trend Страницы: 16
Whirlwind PYROBOX Technical Specifications preview
PYROBOX
Бренд: Whirlwind Страницы: 1
Defender wireless W2K1TB4B3 Setup Manual preview
W2K1TB4B3
Бренд: Defender wireless Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды