background image

17

Specifications

Neck

 

Maple

Body

 

Mahogany

Fingerboard

 

Rosewood

Bridge

 

Maple (height is adjustable)

Frame Unit

 

Beech + Aluminum frame

Tuning Pegs

 

Custom Worm Gear Type

Tail Piece

 

Ebony

Strings

 

Contra Bass Strings (Ball-end type)

Sensors

 

2 Piezo Pickups

Connectors/Controls

 

•  AUX IN (w/Level Control)

 

• 

  (Headphone)/LINE  OUT  output  jack  for 

normal use.

 

•  Volume

 

•  Tone control

Power

 

•  POWER Switch (OFF/ON)

 

•  Battery: 6F22(S-006P)/6LR61  9V battery x1*

 

  *Rechargeable batteries cannot be used.

 

•  Power Adaptor (sold separately): Yamaha 

PA3C (for use in Japan), PA130 (for use inter-
nationally), DC 12 V/700 mA 

Power Consumption

 

2.5W

 (with the PA3C), 

1.0W

 (with the PA130, 

 

PA130A), 

1.1W

 (with the PA130B)

Battery Life (Continuous Use)

 

Using Manganese battery : approximately 12 hours

 

Using Alkaline battery : approximately 24 hours

String Length

 

1,054 mm (41.5”)

Dimensions (with the frame attached and the End Pin fully contracted)

 

1,735 (L) x 525 (W) x 435 (H) mm

 

68.3” (L) x 20.7” (W) x 17.1” (H) 

Weight

 

approximately 10 kg (22 lbs.)

* Design and specifications are subject to change without notice.

002_slb100_en_1204.indd   17

15/01/06   13:27

Содержание SILENT Bass SVB-100



















Отзывы: