Yamaha SILENT Bass SVB-100, Руководство пользователя

Страница: 13 / 18

13
Power Supply
The SILENT Bass™ can be operated with either battery or AC power. Al-
ways turn the power switch on the rear panel OFF before making AC power
connections or replacing the battery.
■
Using the Battery
When the battery is low, the lamp will dim and the sound may become distorted or noisy.
When these symptoms occur, please take note of the following precautions and replace the battery.
• When replacing the battery, purchase a replacement battery that properly fits the battery holder (battery
designs differ among makers). Too big a battery may damage the instrument. Too small a battery may
result in poor conductivity.
• Always follow the +/– signs when inserting the battery. Improper insertion may result in fire.
• To prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove
the battery from the unit when it is not going to be used for an extended period of time.
■
Supplying AC Power
AC adaptor is optional, please purchase the optional power adaptor (Refer to page
17).
1
Plug the adaptor’s DC output cable into the SILENT Bass™’s DC IN 12V jack located on the back
of the instrument, making sure the plug is firmly inserted into the jack.
2
Plug the AC adaptor into a convenient wall AC power socket.
• Battery power is automatically disconnected when the AC adaptor is connected.
• When the AC adaptor is used, the batteries may leak. To prevent leakage we recommend that you re-
move the batteries from the instrument.
• When using an AC adaptor, make sure you use only the appointed compatible adaptor. The use of an
incompatible adaptor may result in damage to the instrument or cause fire, etc. Please use with caution.
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
1
Open the battery case located on the backside of the instru-
ment by pulling the tab labeled “OPEN” toward you, then
open the battery compartment cover.
2
Insert the battery (6F22:S-006P) into the battery compart-
ment. Take careful note of the polarity markings (+/-) as
shown in the illustration when inserting the battery.
3
Close the battery compartment cover and push the battery
case all the way back into the instrument body.
6F22 (S-006P)
9V battery
battery
compartment
battery
compartment
cover
* For customers in the Netherlands
002_slb100_en_1204.indd 13 15/01/06 13:27