Yamaha SB168-ES, Руководство по обслуживанию

Страница: 48 / 154

SB168-ES
48
2. Operation
2-1. Starting the NETWORK terminal diagnostics mode
This startup is used for executing the service inspection.
1. Set the DIP switches to the diagnostic mode.
2. Turn on the power switch of the SB168-ES.
3. All the SIGNAL indicators will fl ash to indicate that the diagnostic mode is started.
If all the SIGNAL indicators do not fl ash, circuits around the SIGNAL LED will be damaged.
2-2. Starting the application for service inspection (DiagSB168-Service.exe)
Double-click the application for service inspection (DiagSB168-Service.exe).
•
Example of startup screen
@
=
>
B
2
<
.
Details of the menu bar>
Tool bar
Description Menu
File
Save output
Saves output content to a file
Save log Saves log content to a file
Exit Closes an application
Test
Execute
Executes a single test
Start Starts a test
Pause Temporarily stops a test
Stop Stops a test
Clear result Clears test results for selected items
NG Stop Stops a test when an NG occurs
Check
All on
Checks a check mark to every item
All off Unchecks every item
Selected on Checks a check mark to a selected item
Selected off Uncheck a check mark for selected items
NG on Checks a check mark to NG items
NG off Unchecks a check mark for NG items
Port setup Configures connection to the product
View
Folder
up Moves to the folder just above the current folder
Large Icons Displays items as large icons
Small Icons Displays items as small icons
List Displays items as a list
Details Displays items as a detailed list
Options Sets up various option settings
Help
About
Displays version information of an application
Version information etc. will
be shown.
Details of test results
will be shown.
Test items will appear.
·
Test items will appear. Items checked in
the checkbox will be tested.
· If you want to inspect an item, select
only one item.
· Select a single item and double-click it
to see a detailed inspection items.
.
;
8
Select the item to be
inspected.
Test result is OK
Test result is NG
[F1]START : Starts a test
[F2]PAUSE : Temporarily stops a test
[F3]STOP : Stops a test
[F4]CLEAR : Clears test result
[F5]EXECUTE : Executes a test
[F6]S.LOG :
Stores log
[F7]S.OUTPUT : Stores output characters
:
[Execution and stopping of inspection]
q
Title bar
The title of an application is shown.
w
Title button
The buttons for controlling the window.
The left button “minimizes”, the middle button “maximizes” and
the right button “closes” the window.
e
Menu bar
The menu list is shown.
The table to the right shows details of the menus.