81
Playing the Songs
This mode allows you to assign a name of up to five characters to a
song.
1
Press the
[ SONG ]
button to put the RY20 into Song Mode. Select a song by
rotating the Jog Dial or using the
[ +1 ]
and
[ –1 ]
buttons.
2
Select the Name display page by pressing the
[PAGE+]
button until the
display reads “
NAME
” and shows the name of the current song. Notice that
the first character is flashing.
The default name for all songs is “
-----
”.
3
Select the first character of the name by rotating the Jog Dial or by using
the
[ +1 ]
and
[ –1 ]
buttons.
4
To move to the next character, press the
[ > ]
button. The second character
will flash. Change that character by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
5
Repeat the previous step until you have finished creating the name for
your song.
■
Name that Song
NOTE
The RY20 contains the following character set, allowing you to use numbers, upper
and lower case letters and symbols for your name.
(Space)
!”#$%&’()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX
YZ[¥]^_‘abcdefghijklmnopqrstuvwxyz{|}
→←
SONG
A CHASE
SONG
MAIN A
PAD BANK
OTHERS
HH
SD
BD
