Yamaha RY20 Скачать руководство пользователя страница 61

Страница: 61 / 140

Other Pattern Functions

All three settings can be reset to their default values by pressing the

[ +1 ]

and

[ –1 ]

buttons simultaneously.

Change the focus to the “

LEVEL

” prompt using the

[ > ]

cursor button.

Modify the value by rotating the Jog Dial or using the

[ +1 ]

and

[ –1 ]

buttons.

The range is from “

” to “

” (full effect).

Change the focus to the “

TIMING

” prompt using the

[ > ]

cursor button.

Modify the value by rotating the Jog Dial or using the

[ +1 ]

and

[ –1 ]

buttons.

The range is from “

” (slight delay) to “

” (extreme delay).

Change the focus to the “

QUANTIZE

” prompt using the

[ > ]

cursor button.

Modify the value by rotating the Jog Dial or using the

[ +1 ]

and

[ –1 ]

buttons.

The repeat values are:

•

eighth note.

•

eighth note triplet.

•

16th note.

NOTE

If the “

LEVEL

” setting is inactive, it is indicated with a value of “

---

” on the

display. Press the

[ > ]

cursor button again to skip the inactive setting.

NOTE

If the “

TIMING

” setting is inactive, it is indicated with a value of “

---

” on the

display.

NOTE

If the “

QUANTIZE

” setting is inactive, the note icon at the right-center of the display

will be off.

Содержание RY20













































































































































Результаты поиска

Содержание RY20

Отзывы:

Похожие инструкции для RY20

Бренды по названию

Популярные бренды

Yamaha RY20, Руководство пользователя

Результаты поиска

Содержание RY20

Отзывы:

Похожие инструкции для RY20

Бренды по названию

Популярные бренды