Yamaha RX10K, Инструкция по сборке, Страница: 91 / 98

6-28
Headlight wire harness
Tighten the frame ground and
voltage regulator upper bolt to-
gether.
Engine oil tank hose
Point the clamp tightening
direction to the downward.
Drain hose
Less than 30 mm (1.2 in).
Pass the coolant reservoir tank
breather hose through be-
tween engine and heat ex-
changer.
To the tail / brake light.
Clamp the coolant hose. Point
the locked section of the clamp
to the outside.
Clamp the wire harness. Tight-
en the frame cross member
and frame together.
Bracket
Connect the gear position
switch lead. (For model with the
reverse) Fold back the gear
position switch lead, and clamp
it. (For model without reverse)
Wire harness
Fuse box
Coolant reservoir tank
Coolant reservoir tank breather
hose
Parking brake cable
Brake hose
Point the clamp position to the
front outside.
Clamp the hose at the white
paint position. Point the clamp
position to the front outside.
Clamp the battery positive lead
and negative lead.
Point the clamp position to the
downward.
Point the clamp position to the
inside.
Clamp the leads before the fix-
ture. 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24