Yamaha RX-Z9 Скачать руководство пользователя страница 41

Страница: 41 / 132

English

AUTO SETUP

PRE

ARA

ION

■

Troubleshooting for the auto setup procedure

Before auto setup

During auto setup

Press

to display detailed information for individual errors. Select Retry to try the auto setup procedure again.

Error message

Cause

Remedy

Connect MIC!

Optimizer microphone is not connected.

• Connect the supplied optimizer microphone to the

OPTIMIZER MIC jack on the front panel.

Unplug Phones!

Headphones are connected.

• Unplug the headphones.

No Setup Menu!

No setup menu items have been selected.

• Select at least one setup menu item.

Memory Guard!

This setting is protected.

• Remove the protection setting for auto setup (see

page 85).

Error message

Cause

Remedy

E01:No Front SP

Front L/R channel signal(s) is (are) not
detected.

• Select the front speakers with SPEAKERS A or B.
• Check the front L/R speaker connections.

E02:No Surr. SP

A surround channel signal is not detected.

• Check the surround speaker connections.

E03:No Pres. SP

A presence channel signal is not detected.

• Check the presence speaker connections.

E04:SBR ->SBL

Only the surround back right channel signal is
detected.

• Connect the surround back speaker to the LEFT

SURROUND BACK SPEAKERS terminal if you
only have one surround back speaker.

E05:Noisy

Background noise is too loud.

• Try auto setup in a quiet environment.
• Turn off noisy electric equipment like air

conditioners, or move it away from this unit.

E06:Check Surr.

Surround back speaker(s) is (are) connected,
though surround L/R speakers are not.

• Connect surround speakers when using (a) surround

back speaker(s).

E07:No MIC

The optimizer microphone was unplugged
during the auto setup procedure.

• Connect the supplied optimizer microphone to the

OPTIMIZER MIC jack on the front panel.

E08:No Signal

The optimizer microphone does not detect test
tones.

• Check the microphone setting.
• Check the speaker connections and placement.

E09:User Cancel

The auto setup procedure was cancelled
because a setting that affects auto setup was
changed during the procedure.

• Perform the auto setup procedure again.

E10:Internal Err

No DSP response.

• Restart this unit, then try the auto setup procedure

again.

E11:Complex Err

Multiple errors occurred.

• Check the speaker connections and placement.

E12:No Speaker

All 9 speakers and 2 subwoofers are not
connected.

• Check the speaker connections and placement.

00EN.00_RXZ9_U.book Page 37 Thursday, November 13, 2003 12:30 PM

Содержание RX-Z9





































































































































Результаты поиска

Содержание RX-Z9

Отзывы:

Похожие инструкции для RX-Z9

Бренды по названию

Популярные бренды

Yamaha RX-Z9, Руководство пользователя

Результаты поиска

Содержание RX-Z9

Отзывы:

Похожие инструкции для RX-Z9

Бренды по названию

Популярные бренды