Yamaha RX-V767, Руководство пользователя

Страница: 37 / 128

CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
En
37
■
When an error message is
displayed during measurement
See “Error messages” (
☞
p. 38 ) for instructions on
resolving the problem and measure acoustics again.
Check the error code displayed and use YPAO to
measure acoustics again as described below.
When “E-1,” “E-2,” “E-3,” “E-4” or “E-6” is
displayed
1
Press
k
ENTER .
2 Press
k
Cursor
E
to select “EXIT.”
3 Press
k
ENTER to terminate YPAO, and
switch the unit to standby mode.
4 Check that the speakers are properly
connected.
5 Turn on the unit and use YPAO again.
When “E-5,” “E-7,” “E-8” or “E-9” is displayed
1 Press
k
ENTER .
2
Check that the environment is suitable for
accurate measurement.
3
Press
k
Cursor
E
to select “RETRY.”
4
Press
k
ENTER to use YPAO again.
When “E-10” is displayed
1
Press
k
ENTER .
2
Press
k
Cursor
E
to select “EXIT.”
3
Press
k
ENTER to terminate YPAO.
4
Switch the unit to standby mode.
5
Turn on the unit and use YPAO again.
■
When a warning message is
displayed after measurement
See “Warning messages” (
☞
p. 39 ) for instructions on
resolving the problem. The speaker causing the problem
can be confirmed from the TV screen display.
To exit YPAO with some options
1
Use
k
Cursor
B
/
C
to select “Save/Exit”
and press
k
ENTER .
2
Use
k
Cursor
D
/
E
to select one of the
following options and press
k
ENTER .
SAVE:
Exits YPAO applying the results of measurement.
CANCEL:
Returns to the previous screen (warning message
screen).
EXIT:
Exits YPAO without saving the results.
k
Cursor
B
/
C
/
D
/
E
k
ENTER
ENTER
SCENE
RETURN
VOLUME
ENHANCER SUR. DECODE
STRAIGHT SLEEP PURE DIRECT PARTY
MOVIE MUSIC
BD
DVD
TV CD RADIO
MUTE
7 8 5 6
9 0 10
1 2 3 4
REC
ENT
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
MAIN ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
OPTION
ON SCREEN
HDMI
AV
AUDIO
1 2 3 4
1 2 5 V-AUX
DOCK
HDMI OUT
MULTI 5
1 2 3 4
6
PHONO
FM
INFO MEMORY
AM
PRESET
TUNER
TUNING
k
NOTE
Although the results of acoustics measurement can be
applied when a warning message is displayed, optimal
sound will not be achieved. Resolving the problem
and using YPAO to measure acoustics again is
recommended.