Yamaha RX-V596RDS Скачать руководство пользователя страница 10

Страница: 10 / 70

A/B/C/D/E, /–

These buttons are used to select a preset station.
A/B/C/D/E:

To select one of a group (A to E) of preset
stations

/–: To select a preset station number (1 to 8)

(next),

(back)

These buttons are used to advance or go back one selection
on the SET MENU and TIME/LEVEL mode.

SET MENU

Press this button to select the items on the SET MENU.

POWER

Press this button to turn this unit on.

STANDBY

Press this button to set this unit in the standby mode.

VOLUME (+/–)

These buttons are used to adjust the volume level.

MUTE

Press this button to mute the sound. To cancel mute, press
this button again.

EFFECT

Press this button to turn on or off the effect speakers (center
and rear) in the following cases:
•

When the selector dial is set to the DSP/TUN position.

•

While the indicator is lit for about three seconds after
pressing DSP.

Description of the Numeric Buttons

The Numeric buttons function in various ways depending
on the position of the selector dial or the combination of
other instructions.

■

When selecting an input source

Press INPUT regardless of the position of the
selector dial.

The indicator lights up for about three seconds.

You can select an input source with the
numeric buttons while the indicator is lit.

CONTROLS AND FUNCTIONS

■

When selecting a DSP program
and turning on or off the effect
speakers (center and rear)

Press DSP regardless of the position of the
selector dial.

The indicator lights up for about three seconds.

You can select a DSP program with the
numeric buttons (1 to 8) and turn on or off the
effect speakers (center and rear) by pressing
EFFECT while the indicator is lit.

Set the selector dial to the DSP/TUN position.

You can select a DSP program directly with the
numeric buttons (1 to 8) and turn on or off the
effect speakers (center and rear) by pressing
EFFECT.

■

When selecting a preset station
number

Set code number “0023” in the AMP/TUN (or
DSP/TUN) position.

Refer to page 51 for setting the code.

Set the selector dial to the AMP/TUN (or DSP/
TUN) position.

You can select a preset station number directly
with the numeric buttons (1 to 8).

Refer to page 29.

0102V596RDS01-08_EN

2/29/0, 3:28 PM

Содержание RX-V596RDS







































































Результаты поиска

Содержание RX-V596RDS

Отзывы:

Похожие инструкции для RX-V596RDS

Бренды по названию

Популярные бренды

Yamaha RX-V596RDS, Руководство пользователя

Результаты поиска

Содержание RX-V596RDS

Отзывы:

Похожие инструкции для RX-V596RDS

Бренды по названию

Популярные бренды