45
English
B
ASIC OPERA
TION
AD
V
ANCED OPERA
TION
APPENDIX
INTR
ODUCTION
PREP
ARA
TION
PRESET REMOTE CONTROL
The provided remote control is factory set to control not only this unit but also most YAMAHA audio components connected
to it.
Selector Dial
There are nine positions that you can select to control connected components with this remote control. For example, if the CD
position is selected, the remote control is set in the CD operation mode, allowing the CD player to be operated by the buttons
on the remote control. When turning the selector dial, the position changes as follows:
Note
• The button functions on the remote control differ depending on the position of the selector dial. Refer to the following pages for details.
Commonly used buttons in any position of the selector dial
Regardless of the position of the selector dial, you can control this unit and your TV with the following buttons.
Note
• You have to set the code for your TV before you can control the TV.
■
Controlling this unit
Refer to pages 7 and 8.
1
STANDBY
2
POWER
3
VOLUME (+/–)
4
SLEEP
Note
• If you have set the code for your TV and set the selector dial to
the TV position, this button is used to set the SLEEP timer for the
TV.
5
MUTE
Note
• If you have set the code for your TV and set the selector dial to
the TV position, this button is used to mute the TV sound.
■
Controlling your TV
!
TV POWER
@
TV INPUT
#
TV VOLUME
AMP/TUN
You can perform the basic operations of
this unit. Refer to pages 7 and 8.
CD
The code for a YAMAHA CD
player is factory set.
CBL/SAT
A cable TV or satellite tuner can be
controlled.
VCR
A VCR can be controlled.
TV
A TV can be controlled.
TAPE/MD
The code for a YAMAHA tape deck is factory set.
(Be sure to set the proper code when operating an
MD recorder.)
DVD/LD & DVD MENU
An LD player can be controlled in the DVD/
LD position. A DVD player can be controlled
in the DVD/LD and DVD MENU positions.
The code for a YAMAHA DVD player is
factory set. If the remote control does not
operate your YAMAHA DVD player, you
need to set the code number “0048”.
DSP/TUN
This unit can be controlled and DSP programs can be
selected directly.
Selector
dial
2
1
3
5
4
@
#
!
0109V596RDS45-52_EN
2/29/0, 3:30 PM
45