Yamaha RX-V577, Руководство пользователя

Страница: 16 / 150

PREPARATIONS
➤
Connecting speakers
En
16
Connect the speakers placed in your room to the unit.
The following diagrams provide connections for 5.1-
and 7.1-channel systems as examples. For other
systems, connect speakers while referring to the
connection diagram for the 5.1-channel system.
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
Audio pin cable (x1: for connecting a subwoofer)
5.1-channel system 7.1-channel system
(RX-V577 only)
2 Connecting speakers
Caution
• Remove the unit’s power cable from an AC wall outlet and turn
off the subwoofer before connecting the speakers.
• Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit’s metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, “Check SP Wires” will appear on the front
display when the unit is turned on.
–
+
–
+
FRONT CENTER SURROUND
SINGLE
SURROUND BACK/BI AMP
/ZONE B
OR OUT
PB
Y
SPEAKERS
SUBWOOFER
PRE OUT
2
1
DC OUT
5V
0.5A
1 2
3
4 5
9
The unit (rear)
• (RX-V577 only)
You can connect 2 subwoofers (with built-in amplifier) to the unit.
The 2 subwoofers output the same sound.
FRONT CENTER SURROUND
SINGLE
SURROUND BACK/BI AMP
/ZONE B
OR OUT
PB
Y
SPEAKERS
SUBWOOFER
PRE OUT
2
1
DC OUT
5V
0.5A
1
6 7
2
3
4 5
9 9
The unit (rear)
• When using only one surround back speaker, connect it to the
SINGLE jack (L side).
1 2 3 4 5 6 7 8 9 10 11
00_RX-V477_V577_om_U.book Page 16 Monday, November 11, 2013 1:19 PM