Yamaha RX-V367 Скачать руководство пользователя | Manualshive

Страница: 58 / 61

background image

En

58

APPENDIX

■

HDMI signal compatibility

Audio signals

•

If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio

sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.

•

Refer to the supplied instruction manuals of the input source component, and set the component appropriately.

Video signals

This unit is compatible with the video signals of the following resolutions:

Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are
registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc.

©

1996-2008 DTS,

Inc. All Rights Reserved.

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered
trademarks of HDMI Licensing LLC.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

Information on HDMI™

Audio signal types

Audio signal formats

Compatible media

2ch Linear PCM

2ch, 32-192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM

8ch, 32-192 kHz, 16/20/24 bit

DVD-Audio, Blu-ray Disc, HD DVD,

etc.

DSD

2/5.1ch, 2.8224 MHz, 1 bit

SACD, etc.

Bitstream

Dolby Digital, DTS

DVD-Video, etc.

NOTES

•

When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,

depending on the type of the DVD player.

•

This unit is not compatible with HDCP-incompatible HDMI or DVI components.

•

Refer to the supplied instruction manuals for details.

To decode audio bitstream signals on this unit, set the input source component appropriately so that the

component outputs the bitstream audio signals directly (does not decode the bitstream signals on the

component).

•

This unit is not compatible with the audio commentary features (for example, the special audio contents

downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio

commentaries of the Blu-ray Disc or HD DVD content.

–

480i/60 Hz

–

576i/50 Hz

–

480p/60 Hz

–

576p/50 Hz

–

720p/60 Hz, 50 Hz

–

1080i/60 Hz, 50 Hz

–

1080p/60 Hz, 50 Hz, 24 Hz

About trademarks

«
...
56
57
58
59
60
...
»

Содержание RX-V367






























































Отзывы:

Нет отзывов

Похожие инструкции для RX-V367

Бренд: Accurate Technology Страницы: 20

Бренд: Jensen Страницы: 12

VM9213 - Touch Screen MultiMedia Receiver

Бренд: Jensen Страницы: 62

Бренд: Jensen Страницы: 9

Бренд: Jensen Страницы: 22

JHD3510 - Heavy Duty CD Receiver

Бренд: Jensen Страницы: 2

VM8013HD - Screen MultiMedia Receiver

Бренд: Jensen Страницы: 78

Phase Linear UV10

Бренд: Jensen Страницы: 90

Бренд: Laird Страницы: 13

Бренд: Laird Страницы: 32

Бренд: SOMFY Страницы: 24

Бренд: Axxera Страницы: 32

Бренд: Boss Audio Systemsu Страницы: 33

Бренд: Strong Страницы: 23

Бренд: SilverStone Страницы: 2

Бренд: Onkyo Страницы: 111

RC4Magic Series 3 DMXio

Бренд: RC4 Страницы: 20

Бренд: Hammarlund Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды