background image

 En

 53

APPENDIX

Glossary

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm for 

headphones. Parameters for headphones have been set for each sound field 

program, so that accurate representations of all the sound field programs 

can be enjoyed on headphones.

Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm that allows you 

to enjoy DSP surround effects even without any surround speakers, by 

using virtual surround speakers. It is even possible to enjoy Virtual 

CINEMA DSP using a minimal two-speaker system that does not include a 

center speaker.

Video information

Component video signal

With the component video signal system, the video signal is separated into 

the Y signal for luminance and the P

B

 and P

R

 signals for chrominance. 

Color can be reproduced more faithfully with this system because each of 

these signals is independent. The component signal is also called the “color 

difference signal” because the luminance signal is subtracted from the color 

signal. A monitor with component input jacks is required in order to output 

component signals.

Composite video signal

With the composite video signal system, the video signal comprises the 

three basic elements of a video picture: color, brightness and 

synchronization data. A composite video jack on a video component 

transmits these three elements combined.

Deep Color

Deep Color refers to the use of various color depths in displays, up from the 

24-bit depths in previous versions of the HDMI specification. This extra bit 

depth allows HDTVs and other displays increase from millions of colors to 

billions of colors and eliminate on-screen color banding for smooth tonal 

transitions and subtle gradations between colors. The increased contrast 

ratio can represent many times more shades of gray between black and 

white. Additionally, Deep Color increases the number of available colors 

within the boundaries defined by the RGB or YCbCr color space.

HDMI

HDMI (High-Definition Multimedia Interface) is the first industry 

supported, uncompressed, all-digital audio/video interface. Providing an 

interface between any sources (such as set-top boxes or AV receivers) and 

audio/video monitors (such as digital TV), HDMI supports standard, 

enhanced or high-definition video as well as multichannel digital audio 

using a single cable. HDMI transmits all ATSC HDTV standards and 

supports 8-channel digital audio, with bandwidth to spare to accommodate 

future enhancements and requirements. 

When used in combination with HDCP (High-bandwidth Digital Content 

Protection), HDMI provides a secure audio/video interface that meets the 

security requirements of content providers and system operators. For 

further information on HDMI, visit the HDMI website at “http://

www.hdmi.org/.”

“x.v.Color”

A color space standard supported by HDMI version 1.3. It is a more 

extensive color space than sRGB, and allows the expression of colors that 

were not hitherto possible. While remaining compatible with the color 

gamut of sRGB standards, “x.v.Color” expands the color space, and can 

thus produce more vivid, natural images. It is particularly effective for still 

pictures and computer graphics.

Содержание RX-V367


























































Отзывы: