Yamaha RX-V367, Руководство пользователя

Страница: 35 / 57

En
35
SETUP
Configuring the settings specific for each input source (Option menu)
■
Combining HDMI/AV1-2 input source
video and audio
Input source: HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
– an external device is connected with an HDMI cable but cannot
transmit audio through HDMI
– an external device with component video output and analog audio
output (such as certain game consoles) are connected to the
system
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
■
Displaying information on audio/video
signals
Input source: HDMI1-4, AV1-4
Displays information on digital audio and video signals on the
front panel display. You can display the signal information by
pressing
i
ENTER on the menu item and using
i
Cursor
B
/
C
.
Audio information
Video information
■
Changing FM mode (Stereo/Monaural)
Input source: TUNER
Sets this unit to automatically match FM broadcast frequencies in
stereo, or to convert the frequency to monaural (
☞
p. 30 ).
■
Automatically presetting FM radio
stations
Input source: TUNER
Automatically detects radio stations in the FM frequency and
registers them as preset stations (
☞
p. 31 ).
■
Clearing preset FM stations
Input source: TUNER
Clears the preset stations (
☞
p. 32 ).
■
Searching for traffic information
Input source: TUNER
Automatically searches for traffic information with the Radio Data
System (
☞
p. 32 ).
Audio In
Audio inputs Settings method
Optical digital audio
input
Select AV1 or AV4. Connect the external component
audio cable to the optical jack for the selected input.
Coaxial digital audio
input
Select AV2 or AV3. Connect the external component
audio cable to the coaxial jack for the selected input.
Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connect
the external component audio cable to the audio jack
for the selected input.
• For details of settings, refer to “Receiving audio from other input
sources” (
☞
p. 15 ) and “Component connections to analog audio
output devices” (
☞
p. 16 ).
• To return audio inputs to their previous settings, display this item
again, and select the original input jack.
SW
C
L
SL
SR
R
Audio
;;;;;;
AV1
HDMI1
VOL.
Assignable audio input jacks
Inputs that change the audio source
Signal Info
FORMAT
Format of audio signals.
CHAN
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, “3/2/0.1” is
displayed.
SAMPL
The sampling frequency of analog-to-digital
conversion.
B RATE
The bit rate of input signal per second.
V IN
Format and resolution of video input signal.
V OUT
Format and resolution of video output signal.
V.MSG
(appears only
when an error
has occurred)
Error messages about HDMI signals and components.
Error message
HDCP Error
HDCP authentication failed.
Device Over
The number of connected HDMI
components is over the limit.
SW
C
L
SL
SR
R
DolbyD
FOR MA T
VOL.
Menu item
Information
• “No Signal” is displayed when no signals are being received,
and “---” is displayed if this unit cannot recognize the incoming
signal.
• The bit rate may vary during playback.
FM Mode
Auto Preset
Clear Preset
TrafficProgram