Firmware Update Procedure for RX-V2067
Page.3 of 6
STEP 4
Start firmware update
Press
INFO
button to start the update.
(Update process may take up to 15 minutes)
If
“UPDATE UNAVAIL”
appears, this means your receiver is already
up-to-date. In this case, power off to exit from Advanced Setup.
Your AV receiver is ready for normal use.
Firmware update in progress
Caution!
DO NOT interrupt power during the update.
In case the power is accidentally cut off resulting in a condition where
you can’t recover normal operation, refer to the troubleshooting
method CASE#2 on the last page.
When completed,
“UPDATE SUCCESS”
appears on the display
Turn off the power of the receiver by pressing the
MAIN ZONE
button.
STEP 5
Check the updated firmware version
Power on the AV receiver and press the
ON SCREEN
button on the
remote control. Select “Information” > “System”.
If your firmware version is “
3.15
”, the AV receiver is up-to-date.
Congratulations!
You have completed the firmware update. Your AV receiver is ready
for normal use.
INFO
MAIN ZONE
