Firmware Update Procedure for RX-V2067
Page.2 of 6
Firmware Update Through Internet
STEP 1
Power off the receiver
(Standby mode).
STEP 2
Enter the ADVANCED SETUP mode
While pressing the
STRAIGHT
button, press the
MAIN ZONE ON/OFF
button and keep
STRAIGHT
button pressed until
“ADVANCED
SETUP”
appears on the front panel display.
(Note: “ADVANCED SETUP” is displayed only for a few seconds)
STEP 3
Select “FIRM UPDATE” from the menu
Press the
PROGRAM
button until
“FIRM UPDATE USB”
is displayed.
Then, press
STRAIGHT
button until
“NETWORK”
is displayed.
Requirement:
-Internet
connection
Your receiver is connected to the Internet if you can receive Internet
radio stations. (See owner’s manual for details)
MAIN ZONE
STRAIGHT
PROGRAM
