
6
Select the center channel output mode suitable for your
speaker configuration.
(Refer to “Speaker configuration” on page 8.)
For the feature of each mode, refer to the “Note” shown
below.
7
Note
In step 6, when you select a center channel output mode, note
the following.
For 5-speaker configuration
NORMAL: Select this mode when you use a center speaker
that is smaller than the main speakers. In this
mode, the bass tone will be output from the main
speakers.
WIDE:
Select this mode when you use the center speaker
approximately same sized as the main speakers.
For 4-speaker configuration
PHANTOM: Select this mode when you do not use the center
speaker. The center sound will be output from the
left and right main speakers.
8
Turn up the volume.
You will hear a test tone (like pink noise) from the left main
speaker, then the center speaker, then the right main
speaker, and then the rear speakers, for about two seconds
each. The display changes as shown below.
*
The test tone from the left rear speaker and the right
rear speaker will be heard at the same time.
*
The state of the test tone output is also shown on the
monitor screen by an image of the audio listening room.
This is convenient for adjusting each speaker level.
Main (L)
Rear
(L and R)
Center
Main (R)
22
VOLUME
0
I0
CENTER
MODE
NORMAL
WIDE
PHANTOM
CONTINUED
8
SPEAKERS
OFF
ON
A
/
B
/
C
/
D
/
E
PRESET STATIONS
TUNING
PTY SELECTOR
KEY MODE
TUNING
MODE
FM
/
AM
MEMORY
PROGRAM
CENTER
MODE
EDIT
AUTO
/
MAN’L MONO MAN’L
/
AUTO FM
BASS
TREBLE
BALANCE
0
–
+
0
–
+
L
R
INPUT
DVD-LD/VCR/V-AUX/TAPE•MD/CD/TUNER/PHONO
VOLUME
0
I0
STANDBY/ON
PHONES
NATURAL SOUND AV RECEIVER RX–V10MK
EON
PTY SEEK
MODE
START
6CH/2CH
CINEMA DSP
RDS MODE
/
FREQ
6
or
VOLUME
REC/PAUSE
DIR B
DIR A
PLAY
DISC
VOLUME
PLAY
DVD/LD
2CH/6CH
PRESET
A/B/C/D/E
–
+
LEVEL
DELAY/CENTER
/REAR/SWFR
TEST
EFFECT
PROGRAM
PROLOGIC
ENHANCED
–
+
SLEEP
TAPE
A/B
ON/OFF
TUNER
CD
PHONO
VCR
V-AUX
POWER /I
8
7
TEST
TEST
Flashes continuously