12
m
Connecting speakers
REAR
CENTER
REAR
8
Ω
MIN
.
/SPEAKER
OUT
SUB
WOOFER
SPEAKERS
SUB
WOOFER
MAIN
CENTER
SURROUND
DVD/LD
6CH DISCRT INPUT
8
Ω
MIN.
/SPEAKER
MAIN
Rear speaker
Rear speaker
Center speaker
Main speaker
Left
Right
Subwoofer system
Left
Right
(Europe model)
Note
Use speakers with the specified impedance
shown on the rear of this unit.
For connecting to the MAIN SPEAKERS terminals
Red: positive (+)
Black: negative (–)
➀
Loosen the knob.
➁
Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
➂
Tighten the knob and
secure the wire.
<
General model only
>
Banana Plug connections are also possible. Simply insert the
Banana Plug connector into the corresponding terminal.
1
2
3
How to Connect:
Connect the SPEAKERS terminals to your speakers with the wire of the proper gauge (keep as short as possible). If the
connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct. That is
the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit or the
speakers, or both.
Main speaker
