E-13
English
Playing CDs
Getting Started
RECEIVING RDS STATIONS
The tuner has the following functions which make use of
the RDS data service. These are originally in operation
ON. However, you can turn these functions OFF, if so
desired.
Optional settings for
RDS functions
defs
1
Select the FM band by pressing
TUNER
.
2
Press
DISP
to display the current time.
3
Press
FREQ PS/PTY/RT/CT
.
4
Each time you press
PTY SEEK MODE
the display
will change as follows:
1. CT
=
CLOCK (ON/OFF)
The tuner corrects the time of the built-in clock
automatically by synchronizing it with the CT data
on the RDS station being received.
• If you receive an RDS station of some other country, the
built-in clock is synchronized with the time setting of the
country.
• If the built-in clock is not yet set for the current time or
reset due to a power failure, etc., it will be set for the time
of the CT data automatically, whether this setting is ON
or OFF.
2. LOCAL
=
CT (ON/OFF)
If the RDS station being received employs the
local time (summer time, etc.) data service, its time
is displayed in the CT mode.
3. A.M.
=
RDS (ON/OFF)
RDS stations are searched instead of all FM
stations by the automatic preset tuning operation
when the setting is ON. (Refer to page 10.)
4. RT SPEED: ±0
Changes the scrolling speed of the radio text
decreasing the value and, in turn, reducing the
speed.
Control Range: ±0 to ±3 (Preset value: ±0)
5
Choose the function ON or OFF by pressing
PTY
SEEK START
, confirming it in the display.
Press
PTY SEEK START
repeatedly to change the
value for RT SPEED.
• If there is no operation for about 20 seconds, this mode is
cancelled and turns into the frequency display. If the
station has PS data, it turns into the PS mode.
6
Press
FREQ PS/PTY/RT/CT
again to restore the
frequency display mode.
DISP
A
D
C
E
B
TIME
RNDM
VOLUME
MODE
PTY SEEK
FREQ PS/PTY/RT/CT
START
TAPE
AUX
MD
CD
TUNER
PRESET
PTY SELECT
TAPE
MD REC
MODE
START
TAPE REC
PROG
TAPE
REP
PEAK
DUBBING
SLEEP
DISP
PTY SEEK MODE
PTY SEEK START
FREQ PS/
PTY/RT/CT
TUNER
