background image

E-11

English

Playing CDs

Getting Started

RECEIVING RDS STATIONS

PS

The name of the RDS station being received is displayed.

• If the unit cannot find a station with PS data, the unit stops

searching and “NO PS” appears on the display.

PTY

The type of the program on the RDS station now being
received is displayed. You can make this unit search for a
station which is broadcasting a program of a desired
program type. (Refer to PTY program mode in the next
section for details.)

RT

Information about the program (such as the title of the
track, artist name, etc.) on the RDS station being received
is displayed using a maximum of 64 alphabetical
characters, including umlaut sign. If other characters are
used in the RT data, they are displayed with an under-bar.

• If the unit cannot find a station with RT data, the unit stops

searching and “NO RT” appears on the display.

CT

Current time is displayed.

• If the unit cannot find a station with CT data, the unit stops

searching and “NO CT” appears on the display.

Note

• RDS may not work properly if the station you are tuned to is

not transmitting the RDS signal properly or if the signal

strength is weak.

• Some FM stations do not offer RDS service. Of those that do,

not all provide the same types of services. The types provided

by the received RDS station are dimmed on the display. Check

with your local radio stations for details on RDS services in

your area.

RDS (Radio Data System) is a data transmission system
which has been introduced by FM stations in many
European countries. Stations using this system transmit an
inaudible stream of data in addition to the normal radio
signal. RDS data contains various types of information,
such  as  PS (Program Service), PTY (Program Type), RT
(Radio Text), and CT (Clock Time).

Receiving RDS data

1

Tune in the FM station. (Refer to page 9, or you can
simply press 

TUNER

 on the remote control.)

2

Press 

FREQ PS/PTY/RT/CT

 to choose the mode.

Each time you press 

FREQ PS/PTY/RT/CT

, the

type changes as follows:

A

D

C

E

B

TIME

RNDM

VOLUME

MODE

PTY SEEK

FREQ PS/PTY/RT/CT

START

TAPE

AUX

MD

CD

TUNER

PRESET
PTY SELECT

TAPE

MD REC

MODE

START

TAPE REC

PROG

TAPE

REP

PEAK

DUBBING

SLEEP

DISP

FREQ PS/

PTY/RT/CT

TUNER

RDS PS

PTY RT CT

RDS

PS

PTY

RT CT

RDS

PS PTY

RT

CT

RDS

PS PTY RT

CT

Содержание RX-E100
































Отзывы: