Yamaha RX-A1000, Руководство пользователя

Страница: 120 / 184

SETUP
Setting various functions (Setup menu)
En
120
■
Entering standby mode
automatically when no operations
are performed
Auto Power Down
If you do not operate this unit or use the remote control
for an extended period of time, it will automatically go
into standby mode (Auto Power Down function). This
function’s default setting is “Off.” When you want to
enable this function, set the amount of time to pass
before this unit will enter standby.
■
Assigning component input and
output jacks
Input Assignment
Assigns the coaxial or optical input jack(s) to the
selected input source when this unit’s initial settings do
not correspond to your needs. Change the parameter to
reassign the respective jacks and effectively connect
more components.
Once the input jacks are reassigned, the corresponding
component can be selected using the Input selector
buttons.
Example: Assigning the OPTICAL input jack to
“AV1.”
1
Press
k
ENTER to display the “Input
Assignment” screen.
2 Press
k
Cursor
B
/
C
/
D
/
E
to select the
cell at the intersection with the “AV1” and
“Coax/Opt” and then press
k
ENTER .
3
Press
k
Cursor
D
/
E
to select “
c
” and then
press
k
ENTER .
Select “None” to clear the existing assignment.
4 Press
k
RETURN to apply change and
return to the previous screen.
k
Cursor
B
/
C
/
D
/
E
k
ENTER
k
RETURN
ENTER
SCENE
VOLUME
ENHANCER SUR. DECODE
STRAIGHT SLEEP PURE DIRECT
AV
AUDIO
1 2 3 4
7 5
FM
INFO MEMORY
AM
PRESET
PARTY
MOVIE MUSIC
MUTE
7 8 5 6
9 0 10
1 2 3 4
REC
ENT
TOP
MENU
POP-UP
MENU
SOURCE
MAIN ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
DOCK
HDMI OUT
MULTI
1 2 3 4
6 V-AUX
USB NET
TUNER SIRIUS PHONO
CATEGORY
TUN./CH
ON SCREEN OPTION
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
DISPLAY
k
4Hours Goes into standby mode, when you have
not operated this unit for four hours.
8Hours Goes into standby mode, when you have
not operated this unit for eight hours.
12Hours Goes into standby mode, when you have
not operated this unit for twelve hours.
Off (Default) Auto Power Down function is disabled.
This unit starts a countdown of 30 seconds before
entering the standby mode. Pressing any key of the
remote control during the countdown cancels entering
the standby mode and reset the timer.
The choices indicate the following jacks.
a
,
b
,
f
: COAXIAL jacks
c
,
d
,
e
: OPTICAL jacks
, , , : COMPONENT VIDEO jacks
The choices indicate the jacks marked the same
alphanumeric on the rear of this unit. For details on
marks on the rear of this unit, refer to “Rear panel”
(
☞
p. 10 ).
•
A specific item cannot be selected more than once for
the same type of jack.
•
Only component, coaxial and optical jacks can be
reassigned.
•
Coaxial and optical jacks cannot be assigned to the
input at the same time.