20
Owner’s Manual
Other functions
Initializing the RSio64-D
To return (initialize) the internal memory to its factory-set
state, for example if you move the unit to a different
location, proceed as follows.
1.
Turn the unit off.
2.
On the front panel, set device setting DIP
switch 7 down and switch 8 up (INITIALIZE).
3.
Turn the unit on.
Initialization begins. When initialization is completed,
the SLOT 1–4 [LOCK] and SLOT 1–4 [SRC] indicators
flash green and red alternately.
4.
Verify that initialization is completed, and turn
the unit off.
5.
Set device setting DIP switches 7 and 8 both up
(NORMAL).
6.
Turn the unit on.
The following parameters are initialized.
(*1) The third and fo
u
rth characters of the Dante de
v
ice la
b
el
depend on de
v
ice setting DIP s
w
itch 1 and the SETUP [UNIT
ID] rotary s
w
itch. The lo
w
er six digits depend on the lo
w
er six
digits of the
u
nit’s MAC address.
* When shipped from the factory, all of the de
v
ice setting DIP
s
w
itches are set to the
u
p
w
ard position.
Updating the RSio64-D’s
hardware settings
If the SLOT 1–4 [LOCK] indicators and the SLOT 1–4
[SRC] indicators are alternately flashing red and the unit
does not start up, it may be that the unit’s hardware settings
were not updated when updating the firmware. In this case,
proceed as follows to update the RSio64-D’s hardware
settings.
1.
While holding down the SLOT 3 [SRC] key, turn
the power on again.
Updating of the unit’s hardware settings begins. During
the update, the SLOT 1 [LOCK] indicator and the
SLOT 1 [SRC] indicator light simultaneously. To
indicate the status during the update process, both the
[LOCK] indicator and the [SRC] indicator successively
light in the order of SLOT 2
SLOT 3
SLOT 4.
When the update is completed, the eight indicators
flash once and then return to the normal illumination
status.
Parameter
Initialized setting
SLOT 1–4 SRC
OFF
WORD CLOCK SELECT DANTE/4
8
kHz
USER PATTERN
Same ro
u
ting settings as preset pat-
tern 1
STATIC IP (Man
u
al)
0.0.0.0
Panel Lock
Lock defeated
Dante patches
All off
Dante de
v
ice la
b
el
Y001-Yamaha-RSio64-D-123456
(*1)
7 8
O
N
1 2 3 4 5 6 7 8
7 8
Содержание RSio64-D
Страница 25: ...Owner s Manual 167 Dimensions Dimensions ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 88 365 480 430 360 Unit mm ...
Страница 27: ...Owner s Manual 169 ...
Страница 29: ...MEMO ...
