E-
26
ADVANCED OPERATION
Operating the built-in FM tuner
With the Application Software, you can operate the tuner more easily than on the front panel or the remote control, including
additional functions available on the Application only, for example storing stations automatically and assigning names to
preset stations.
Press the button for calling the tuner operation panel at the right upper part of the Main Panel. The following screen appears.
1
Switching the reception mode
This button switches the reception mode, FM auto
stereo or FM monaural.
2
Display for the received station
The frequency of the currently received station or the
name of the preset station is shown here.
3
Manual tuning
/
(down/up) buttons
Press
to select higher frequencies, and
to
select lower frequencies.
4
TITLE
This button switches the showing mode of the preset
station list, frequencies or names.
5
CLOSE
This button closes the tuner operation panel.
6
ADD
This button is used for adding or changing preset
stations.
7
PRESET EDIT
This button opens the PRESET EDIT panel.
8
Preset station list
This list shows the all preset stations by their
frequencies or names.
Storing stations (PRESET EDIT)
Press the PRESET EDIT button on the left lower part of the tuner operation screen. The following screen opens and
allows you to edit presets.
1
Auto storing
Press the START button, and received stations are
stored in sequence automatically.
2
Naming presets
You can assign a name consisting up to ten characters
to each preset station. The names are shown in the
preset station list on the tuner operation panel.
3
Manual storing
You can store the desired stations one by one. Press
the START button, and all of the receivable stations are
searched out. You can select only the desired stations
and store them onto the desired preset groups and
numbers.
4
CLOSE
Press this button to close the current PRESET EDIT
panel and restores the tuner operation panel.
3
6
1
2
4 5
7
8
3
1
2
4
