RM Series Wireless Microphone System Reference Manual
26
• Allows you to check/change microphone settings.
-
[Michrophone Name]:
Allows you to check/change the name of the microphone.
-
[Group]:
Allows you to group the microphones. Grouping microphones synchronizes them when turning one on/off.
-
[Start Mode]:
Allows you to select whether the microphone enters Standby mode when it is started up.
-
[Start Mute Mode]:
Allows you to select whether the mic is on or off when the microphone is started up.
-
[Mic Button Behavior]:
Allows you to set the operation of the Mic button to one of the following.
- [TOGGLE]:
Turn on/off the microphone by touching the Mic button.
- [PUSH TO TALK]:
The microphone is on while the Mic button is touched. Multiple devices cannot be used to talk at the same time.
- [DISABLE]:
The Mic button is deactivated.
-
[Alarm when out of area]:
Allows you to select whether the Mic indicator flashes to indicate that the microphone is out of range for a DECT connection.
-
[Fader Level]:
Allows you specify the microphone fader level. The setting range is between –128 dB and +12 dB.
-
[High Pass Filter]:
Allows you to select the High Pass filter setting. Select one of the following: NONE, 110 Hz, 140 Hz, 175 Hz, 225 Hz.
-
[Low Pass Filter]:
Allows you to select the Low Pass filter setting. Select one of the following: NONE, 4 kHz, 8 kHz, 12 kHz.
