RM Series Wireless Microphone System Reference Manual
15
2
Battery button
3
Battery indicator
IMPORTANT:
The microphone is pre-installed with an RM-WBT battery. In order to maintain battery capacity, charge the
microphone (battery) once every six months.
NOTE:
• Power consumption can be reduced by putting the microphone in standby mode.
• Putting the microphone in standby mode cuts the DECT connection with the access point. When the standby mode
is exited (by long-pressing the Battery button again for 2 to 3 seconds), the connection is re-established.
[Bottom panel]
1
PAIR button
Condition
Battery indicator
Unit status
Charging the unit
Lit green
Charging (available operating time of 15 hours or more)
Charging the unit
Lit orange
Charging (available operating time of 3 hours to less
than 15 hours)
Charging the unit
Lit red
Charging (available operating time of less than 3 hours)
Charging the unit
Unlit
Charging finished
Battery button pressed
Lit green for two seconds
Remaining operating time of 15 hours or more
Battery button pressed
Lit orange for two seconds
Remaining operating time of 3 hours to less than 15
hours
Battery button pressed
Lit red for two seconds
Remaining operating time of less than 3 hours
(Continuing to use the unit without charging)
Flashes red
Remaining operating time of less than 1 hour
Battery button long-pressed for 2 to 3
seconds
Flashes orange slowly
Enters standby mode
Condition
Mic indicator
Unit status
PAIR button long-pressed for at least 2 seconds
Flashes blue quickly
Waiting for pairing/Pairing
PAIR button long-pressed for at least 2 seconds
(After flashing blue quickly)
Flashes blue twice
Paired successfully
PAIR button long-pressed for at least 2 seconds
(After flashing blue quickly)
Flashes red twice
Pairing failed
1
