Yamaha RIVAGE PM Series, Дополнительное руководство

Страница: 4 / 31

CONTENTS
PORT NAME
4
RIVAGE PM series V3 Supplemental Manual
■
Setting screen
PORT NAME tag on the SYSTEM CONFIG screen
1
Network select tab
Press this tab repeatedly to select the network for the device from:
TWINLANe, DANTE, or DSP/CS.
2
Device select buttons
Press one of these buttons to select a device to edit.
3 Device label
Press here to enter the device name.
4 Slot list
Press a slot label to enter the slot name.
5 Port list
Press a port label to enter the port name.
6
List select knob
Use the corresponding screen encoder or the [TOUCH AND TURN] knob to select a slot or
port.
7 Keyboard button
Press this button repeatedly to toggle between the direct input and the input from the NAME
EDIT popup window.
8 DEVICE SYNC/DANTE SETUP popup button
Press this button to access the DEVICE SYNC popup window in which you can
sync
port name
or other labels.
NOTICE
To apply the labeled names, you must synchronize the
data from the control surface to the connected device.
If you synchronize the data in the opposite direction,
the labeled name will be overwritten.
If you selected a Dante network, the DANTE SETUP
popup window will be displayed.
If the THIS CONSOLE button is turned on, the labeled
names on the control surface will take effect and
overwrite those labeled on the device. If the DANTE
CONTROLLER button is turned on, the names
labeled on the device will become effective.
7 6
8
1
3
2
4
5