Yamaha Revolabs HD Venue 01-HDVENU Скачать руководство пользователя страница 30

Страница: 30 / 35

replacement instructions for returning and servicing non replaceable type

microphone batteries. For replaceable type battery microphones, with serial

number preference starting with either 7010 or 8020, replace only with the same

manufacturer and model battery type recommended by Revolabs. Please

contact

Yamaha UC o

r your AV service provider for correct manufacturer

approved and recommended replacement type batteries or process for return and

replacement for either type battery.

Caution

: Risk of explosion if batteries are mishandled or replaced by an incorrect

type. Do not disassemble batteries or attempt to charge outside the system. Do not

dispose of batteries in fire. Dispose of batteries in accordance with manufacturer’s

instructions and local regulations.

Either a solid RED LED (charging) or solid GREEN LED (100% charged) will

appear to confirm that the microphone is inserted properly in the Charger

Base. The microphones are not transmitting audio to the HD Base Station

while in the Charger Base. In normal use, batteries should fully charge in

about 2 hours, but will “quick-charge” to 80% capacity in approximately 1 hour

and 20 minutes. Fully charged microphones left in the Charger Base remain

solid GREEN.

Updating the Revolabs HD

Firmware

Revolabs HD

Systems are field upgradable for the firmware portion of the

Base Station and microphones. The firmware must be sent to the Base station

using the Revolabs HD Panel. The software can be downloaded at

https://uc.yamaha.com/resources/support/

Updating the HD Venue Base Station and HD Microphones

1. Connect to the Base Station using the mini-USB cable.

2. Pair both mics to the Base Station and make sure they are out of the

Charger Base.

3. Start the Revolabs HD Control Panel software

4. Select the “Firmware” button on the Control Panel

5. Choose the desired firmware version from the location it was saved

during download.

6. Choose whether you would like to update the Base Station, Mics, or

Both.

7. Select OK. The Revolabs HD Firmware Loader will notify you when

complete.

The HD Microphone firmware updates wirelessly during the firmware process

as long as the microphones are out of the Charger Base, paired to the Base

Station, and communicating with the Base Station.

Содержание Revolabs HD Venue 01-HDVENU




































Результаты поиска

Содержание Revolabs HD Venue 01-HDVENU

Отзывы:

Похожие инструкции для Revolabs HD Venue 01-HDVENU

Бренды по названию

Популярные бренды

Yamaha Revolabs HD Venue 01-HDVENU, Руководство пользователя и настройки

Результаты поиска

Содержание Revolabs HD Venue 01-HDVENU

Отзывы:

Похожие инструкции для Revolabs HD Venue 01-HDVENU

Бренды по названию

Популярные бренды