Yamaha Raptor YFM7RSEZ, Руководство пользователя

Страница: 85 / 154

8-6
8
9 * Wheel hub bearings
• Check for looseness or damage, and replace if
necessary.
√ √ √ √
10 * Swingarm pivots
• Check operation and for excessive play, and re-
place bearings if necessary.
• Lubricate with lithium-soap-based grease.
√ √ √
11 *
Upper and lower
arm pivots
• Lubricate with lithium-soap-based grease.
√ √ √
12 Drive chain
• Check chain slack and adjust if necessary.
• Check rear wheel alignment and correct if neces-
sary.
• Clean and lubricate.
√ √ √ √ √
13 * Chassis fasteners
• Make sure that all nuts, bolts, and screws are
properly tightened.
√ √ √ √ √
14 *
Shock absorber as-
semblies • Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
√ √ √
15 *
Rear suspension re-
lay arm and con-
necting arm
pivoting points
• Check operation and correct if necessary.
• Lubricate with lithium-soap-based grease.
√ √ √ √
16 * Steering shaft • Lubricate with lithium-soap-based grease.
√ √ √
17 * Steering system
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
√ √ √ √ √
18 Engine oil
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
√ √ √ √
NO. ITEM
CHECK OR MAINTENANCE
JOB
INITIAL EVERY
Whichev-
er comes
first
month 1 3 6 6 12
km
(mi)
320
(200)
1300
(800)
2500
(1600)
2500
(1600)
5000
(3200)
hours 20 80 160 160 320
U1AS10E0.book Page 6 Tuesday, February 10, 2009 9:33 AM