Yamaha Raptor YFM35RA Скачать руководство пользователя страница 113 | Manualshive

Страница: 113 / 142

Yamaha Raptor YFM35RA Скачать руководство пользователя страница 113

8-41

8

1. Remove the headlight bulb holder cover at the

rear of the headlight by pulling it off.

2. Remove the headlight bulb holder by pushing

it inward and turning it counterclockwise.

3. Remove the burnt-out bulb from the headlight

unit by pulling it out.

4. Install a new headlight bulb into the headlight

unit by aligning the projection on the bulb with
the groove in the headlight unit.

NOTICE:

Do

not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity
of the bulb, and the bulb life will be ad-
versely affected. Thoroughly clean off any
dirt and fingerprints on the headlight bulb
using a cloth moistened with alcohol or
thinner.

[ECB00651]

1. Headlight bulb holder cover

1. Headlight bulb holder

U1BS11E0.book Page 41 Monday, April 5, 2010 8:56 AM

«
...
111
112
113
114
115
...
»

Содержание Raptor YFM35RA















































































































































Отзывы:

Нет отзывов