manualshive.com logo in svg

Yamaha Raptor 660, Руководство пользователя

Поделиться
Скачать
Yamaha Raptor 660 Скачать руководство пользователя страница 65

6-11

EBU01174

Parking on a slope

1. Bring the machine to a stop by applying

the brakes in low gear. 

2. Stop the engine and release the clutch

lever. 

3. With the rear brake applied, apply the

parking brake and slowly release the
brake pedal.

WARNING

POTENTIAL HAZARD 
Parking on a hill or other incline. 
WHAT CAN HAPPEN 
The ATV could roll out of control, in-
creasing the chance of an accident. 
HOW TO AVOID THE HAZARD 
Avoid parking on hills or other inclines.
If you must park on an incline, put the
machine in low gear, apply the parking
brake, and block the front and rear
wheels with rocks or other objects. Do
not park the ATV at all on hills that are
so steep you could not walk up them
easily. 

U5LP13.book  Page 11  Wednesday, March 5, 2003  4:16 PM

Содержание Raptor 660


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды