manualshive.com logo in svg

Yamaha Raptor 660, Руководство пользователя

Поделиться
Скачать
Yamaha Raptor 660 Скачать руководство пользователя страница 61

6-7

CAUTION:

_ 

●

Do not coast for long periods with the
engine off, and do not tow the ma-
chine a long distance. Even in neutral
position, the transmission is only
properly lubricated when the engine is
running. Inadequate lubrication may
cause damage. 

●

Always use the clutch when changing
gears. The engine, transmission and
drive train are not designed to with-
stand the shock of forced shifting and
can be damaged by shifting without
the clutch. 

_

EBU00203

To start out and accelerate:

1. Release the throttle lever.

CAUTION:

Always close the throttle while shifting
gears. Otherwise, damage to the engine
and drive train may result.

2. Pull the clutch lever to disengage the

clutch.

3. Shift into first gear.
4. Open the throttle gradually and at the

same time, release the clutch lever slow-
ly.

5. Once the machine has attained adequate

speed, release the throttle, and at the
same time, quickly pull in the clutch lever.

6. Shift into second gear. (be careful not to

shift into neutral)

7. Open the throttle part way and gradually

release the clutch lever.

U5LP13.book  Page 7  Wednesday, March 5, 2003  4:16 PM

Содержание Raptor 660


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды