manualshive.com logo in svg

Yamaha Raptor 660, Руководство пользователя

Поделиться
Скачать
Yamaha Raptor 660 Скачать руководство пользователя страница 47

5-4

EBU01085

Fuel

Make sure there is sufficient gasoline in the
tank.

CAUTION:

_ 

Use only unleaded gasoline. The use of
leaded gasoline will cause severe damage
to internal engine parts, such as the valves
and piston rings, as well as to the exhaust
system. 

_

Your Yamaha engine has been designed to
use regular unleaded gasoline with a pump
octane number ([R+M]/2) of 86 or higher, or
research octane number of 91 or higher. If
knocking or pinging occurs, use a different
brand of gasoline or premium unleaded fuel.
Unleaded fuel will give you longer spark plug
life and reduced maintenance cost.

WARNING

POTENTIAL HAZARD 
Riding with improperly operating
brakes. 
WHAT CAN HAPPEN 
You could lose braking ability, which
could lead to an accident. 
HOW TO AVOID THE HAZARD 
Always check the brakes at the start of
every ride. Do not ride the ATV if you
find any problem with the brakes. If a
problem cannot be corrected by the ad-
justment procedures provided in this
manual, have a Yamaha dealer check for
the cause.

Recommended fuel: 

UNLEADED GASOLINE ONLY 

Fuel tank capacity: 

Total: 

12 L (2.64 Imp gal, 3.17 US gal) 

Reserve: 

2.6 L (0.57 Imp gal, 0.69 US gal)

U5LP13.book  Page 4  Wednesday, March 5, 2003  4:16 PM

Содержание Raptor 660


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды