Yamaha R15 YZF155 2018, Руководство пользователя

Страница: 27 / 94

4
4-9
Shows the vehicle’s traveling speed
since it was last reset.
To reset the average speed display,
push and hold the “RESET” button un-
til the average speed flashes, and then
push the button again .
Shift timing indicator light
The shift timing indicator light has four
settings which can be adjusted.
z
Flashing pattern: this function al-
lows you to choose whether or not
the indicator light will come on and
whether it should flash or stay on
when activated.
z
Activation point: this function al-
lows you to select the engine
speed at which the indicator light
is activated.
z
Deactivation point: this function
allows you to select the engine
speed at which the indicator light
is deactivated.
z
Brightness: this function allows
you to adjust the brightness of the
indicator light.
To adjust the shift timing indicator light
1. Turn the key to “ ”.
2. Push and hold the “SELECT” but-
ton.
3. Turn the key to “ ”, and then re-
lease the “SELECT” button after
five seconds. After that push the
“SELECT” button again. The shift
timing indicator light can now be
adjusted.
To set the flashing pattern
1. Push the “RESET” button to select
one of the following flashing pat-
tern settings:
z
On: the indicator light stays
on when activated. (This set-
ting is selected when the indi-
cator light stays on.)
z
Flash: the indicator light
flashes when activated. (This
setting is selected when the
indicator light flashes four
times per second.)
1. Shift timing indicator light
2. Brightness level display
2
1
z
Off: the indicator light is deac-
tivated; in other words, it
does not come on or flash.
(This setting is selected when
the indicator light flashes
once every two seconds.)
2. Push the “SELECT” button to con-
firm the selected flashing pattern.
The shift timing indicator light
changes to the activation point
setting mode.
The tachometer will show the current
setting r/min for the activation point
and deactivation point setting modes.
To set the shift activation point
TIP
The shift timing indicator light activa-
tion point can be set between 9000
r/min and 13000 r/min. The indicator
light can be set in increments of 250
r/min.
Instrument and control functions