manualshive.com logo in svg

Yamaha R15 YZF155 2018, Руководство пользователя

Поделиться
Скачать
Yamaha R15 YZF155 2018 Скачать руководство пользователя страница 57

7

7-11

Periodic maintenance and adjustment

diagnose such problems yourself. In-
stead, have a Yamaha dealer check
the vehicle.

2. Check the spark plug for electrode

erosion and excessive carbon or
other deposits, and replace it if
necessary.

3. Measure the spark plug gap with a

wire thickness gauge and, if nec-
essary, adjust the gap to specifi-
cation.

To install the spark plug

1. Clean the surface of the spark

plug gasket and its mating sur-
face, and then wipe off any grime
from the spark plug threads.

2. Install the spark plug with the

spark plug wrench, and then tight-
en it to the specified torque.

TIP

If a torque wrench is not available
when installing a spark plug, a good
estimate of the correct torque is 1/4–
1/2 turn past finger tight. However, the
spark plug should be tightened to the
specified torque as soon as possible.

3. Install the spark plug cap.
4. Install the cowling.

EAUE0453

Engine oil and oil filter ele-
ment

The engine oil level should be checked
before each ride. In addition, the oil
must be changed and the oil filter ele-
ment replaced at the intervals specified
in the periodic maintenance and lubri-
cation chart.

To check the engine oil level

1. Place the vehicle on a level sur-

face and hold it in an upright posi-
tion. A slight tilt to the side can
result in a false reading.

2. Start the engine, warm it up for

several minutes, and then turn it
off.

3. Wait a few minutes until the oil set-

tles, remove the oil filler cap, wipe
the dipstick clean, insert it back
into the oil filler hole (without
screwing it in), and then remove it
again to check the oil level.

NOTICE:

 Do not operate the ve-

hicle until you know that the en-
gine oil level is sufficient.

 [ECA10012]

Specified spark plug:

NGK/MR8E9

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

Tightening torque:

Spark plug:

13.0 N·m (1.3 kgf·m, 9.6 lb·ft)

1. Spark plug gap

Содержание R15 YZF155 2018































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды