CONTROLS AND FUNCTIONS
7
En
IN
TRO
D
U
C
TI
O
N
CONTROLS AND FUNCTIONS
Engli
s
h
Rear panel
1
GND terminal
Used to connect a turntable (see page 10).
2
TAPE jacks
Used to connect a tape deck (see page 10).
3
Antenna terminals
Used to connect FM and AM antennas (see page 12).
4
DOCK jack
Used to connect an optional Yamaha Universal Dock for
iPod (such as the YDS-12), Wireless System for iPod
(YID-W10), or Bluetooth Wireless Audio Receiver
(YBA-10) (see page 25).
5
Power cable
For connecting this unit to an AC wall outlet (see page
12).
6
PHONO jacks
Used to connect a turntable (see page 10).
7
CD jacks
Used to connect a CD player (see page 10).
8
LINE 1-2 jacks
Used to connect audio components (see page 10).
9
SUBWOOFER OUT jack
Used to connect a subwoofer with built-in amplifier (see
page 10).
y
The SUBWOOFER OUT jack attenuates signals over 90 Hz.
0
POWER MANAGEMENT switch
Used to enable or disable the automatic power down
function. When this function is enabled, this unit
automatically enters standby mode if it is not operated for
a certain amount of time (3 settings are available; see page
32).
A
SPEAKERS terminals
Used to connect speakers (see page 10).
B
IMPEDANCE SELECTOR switch
Used to select the impedance setting (see page 11).