24
En
FM/AM TUNING
• It may take a while for this unit to receive all of the Radio Data
System data from the station.
• If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the “RADIO TEXT” mode requires a large amount
of data and may not be available even when the other Radio
Data System display modes are available.
• If reception is poor, set FM Mode to “MONO” (see page 18).
• If the signal is weakened by external interference while this unit
is receiving the Radio Data System data, the reception may be
cut off unexpectedly.
• When the “RADIO TEXT” mode is selected, this unit can
display program information using a maximum of 128
alphanumeric characters, including the umlaut symbol.
Unavailable characters are displayed as “_” (underscore). The
displayed information scrolls continuously.
This unit can automatically search for Radio Data System
stations that provide traffic programs (TP).
1
Press TP on the front panel (or TP on the
remote control) to search for a TP station.
“TP SEARCH” is displayed on the front panel
display for about 3 seconds, and then the unit starts
searching.
When a TP station is received, the TP indicator lights
up and the unit stops searching.
y
To search for the next TP station, press TP again.
• Press TP during TP search to cancel.
• If no TP Stations are found, “TP NOT FOUND” is displayed on
the front panel display and this unit returns to the state before
searching.
Notes
TP Search function
(FM stations only)
Notes
TP
TP
TP indicator
