108
PSR-S950/S750 Reference Manual
10
Connections
MIDI Receive Settings
The explanations here apply to the RECEIVE page in step 4 on
. This determines which parts will
receive MIDI data and over which MIDI channels the data will be received.
1
Use the [A]/[B] buttons or [1
]/[2
] buttons to select the channel to be received.
The PSR-S950/S750 can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB
connection.
2
Use the [3
] buttons to select the part via which the selected channel will be
received.
The Parts listed on this display are the same as those shown in the MXING CONSOLE display and
CHANNEL ON/OFF display with the exception of the following parts.
KEYBOARD
The received note messages control the instrument’s keyboard performance.
EXTRA PART 1–5
There are five parts specially reserved for receiving and playing MIDI data. Normally, these parts are not
used by the instrument itself. The PSR-S950/S750 can be used as a 32-channel multi-timbral tone
generator by using these five parts in addition to the parts (except for the microphone sound).
3
Use the [4
]–[8
] button to determine the types of data to be received.
MIDI transmission/reception via the [USB TO HOST] terminal and MIDI [IN]/[OUT] terminals
The relationship between the MIDI [IN]/[OUT] terminals and the [USB TO HOST] terminal which can
be used for transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as
follows:
1
1
2
3
The dots corresponding to each channel
(1–16) flash briefly whenever any data is
received on the channel(s).
MIDI reception
MIDI transmission
[MIDI IN] terminal
[USB TO HOST] terminal
[MIDI OUT] terminal
[USB TO HOST] terminal
Port handling
USB2
USB1
Merge
MIDI/USB1
01–16
USB2
01–16
MIDI/USB 01–16